UT25氣動執行器 Max-Air

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地上海

在線詢價收藏產品查看聯系電話

塑料機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2025-04-29 10:26:47瀏覽次數：18次

聯系我時，請告知來自塑料機械網

產品分類 品牌分類

暫無信息

上海悍田布茨自控工程有限公司

經營模式：其他

商鋪產品：341條

所在地區：上海上海

詢價 給他留言

產品簡介

UT25氣動執行器 Max-Air

詳細介紹

UT25氣動執行器 Max-Air

The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design utilizing the same body and end caps for double acting and spring return units.
Namur Mounting
Namur VDI/VDE 3845 and ISO 5211 dimensions on all sizes. No special blocks are required to mount solenoid valves, limit switches or positioners.Degree of Travel
The standard angle of rotation is 90°. Additional travel rotations of 120°, 135°, 150° ａnd 180° are available. UT25 and upper sizes feature a double travel stop with ±10° .

Bottom Mounting Flange
The “patent pending" bottom plate design, unique to MAX-AIR, secures a captive pinion (anti-blowout system) and permits flexibility in mounting by retaining AISI 304 nuts (standard) or AISI 304 bolts (optional) in either dual ISO patterns, or to customer dimensions.
Flexible Output Shafts
The female pinion drive is standard with a double square output drive, and optional with a double-D drive, keyed drive and designs to meet your specific requirements.
Shaft bearings isolate the pinion gear from the housing and support the shaft for high cycle applications. Many competitive manufacturers do not provide this critical feature.
High Visibility Position Indication
External open/close indicator as standard, available for all the rotations. Pinion height (NAMUR 30) allows manual override without disturbing the indicator position.

Pistons
Pistons incorporate double wear pads to separate the rack from the actuator wall and serve as both guide and wear bearings.

Fasteners
Epoxy coated special steel springs are pre-loaded with non-metallic materials. The stainless steel end cap fasteners are extra long to allow for spring relaxation. All parts are corrosion resistant.

Testing & Traceability
All units are externally stamped with a progressive traceable serial number.
99% of all units are factory pressure and leak tested, and individually boxed for shipment.

Working Conditions
Air pressure operation from 2 to 10 Bar (40 - 150 PSI). Water, nitrogen and compatible hydraulic fluids may also be used to power the actuator.
All external fasteners are corrosion resistant stainless steel.
All internal and external surfaces are hard anodized for corrosion resistance, with all units permanently lubricated at the factory with non-silicone grease.